Article archive
Submitted by Anonymous (not verified) on Thu, 02/21/2013 - 21:36
New P3IC series pressure transducers from HBM can be used for static and dynamic measurements in the pressure range 10 to 3000 bar
Submitted by Anonymous (not verified) on Thu, 02/21/2013 - 21:36
Amplicon is launching an entry-level, all-gigabit, four-port switch and media converter for use with high-bandwidth devices operating in harsh environments
Submitted by Anonymous (not verified) on Thu, 02/21/2013 - 21:36
KRPX is the new version of REDEX ANDANTEX rack and pinion high-tech planetary reducers
Submitted by Anonymous (not verified) on Thu, 02/21/2013 - 21:36
Solution for process monitoring almost any type of measurement with speech, display and alarming, says Omega
Submitted by Anonymous (not verified) on Thu, 02/21/2013 - 21:36
Research shows 19 per cent increase in people who would recommend engineering as a career to their children, family or friends
Submitted by Anonymous (not verified) on Thu, 02/21/2013 - 21:36
Output voltage is 0 to 70kV at 0 to 1mA and maximum output power is 70W; 5.5VDC, 3.5A grounded filament power supply
Submitted by Anonymous (not verified) on Thu, 02/21/2013 - 21:36
Can be bent and coiled to enable movement in both the horizontal and vertical axes
Submitted by Anonymous (not verified) on Thu, 02/21/2013 - 21:36
Parvalux EMD now has standard IP65 GB12 square-framed, worm-wheel gearboxes available for use with its DC commutated permanent-magnet motors
Submitted by Anonymous (not verified) on Thu, 02/21/2013 - 21:36
SKF has developed a magnetic sensor bearing for use in Valeo's Stars (starter alternator reversible system) for micro-hybrid cars
Submitted by Anonymous (not verified) on Thu, 02/21/2013 - 21:36
Schaeffler has developed the Isotect A coating that can be applied to the external surfaces of motor bearings to prevent damage from stray currents
Submitted by Anonymous (not verified) on Thu, 02/21/2013 - 21:36
New KQ capacitive sensors form IFM are very simple to set up and use, plus each model in the range can perform multiple functions
Submitted by Anonymous (not verified) on Thu, 02/21/2013 - 21:36
Blue Ridge Numerics says that CFdesign 2010 enables engineers to investigate pass-fail and what-if engineering scenarios as part of a highly efficient workflow
Submitted by Anonymous (not verified) on Thu, 02/21/2013 - 21:36
Harting's new Han Pushpull Power five-pole power connector is compact, sealed to IP65/67 and available with a choice of metal or plastic housings
Submitted by Anonymous (not verified) on Thu, 02/21/2013 - 21:36
Magnetrol has updated its E3 Modulevel so that it benefits from increased functionality, diagnostics and the capability to configure the transmitter
Submitted by Anonymous (not verified) on Thu, 02/21/2013 - 21:36
The R-Series Ethernet Powerlink position sensor from MTS is designed for use in dynamic control applications with short cycle times
Submitted by Anonymous (not verified) on Thu, 02/21/2013 - 21:36
Acoustic time delay beamforming techniques to deliver high quality survey data, says Tritech
Submitted by Anonymous (not verified) on Thu, 02/21/2013 - 21:36
Submitted by Anonymous (not verified) on Thu, 02/21/2013 - 21:36
Having made his name as a race car designer in the 1980s, Hugo Spowers left the industry because of concerns about its environmental impact. While studying for an MBA at Cranfield University, he examined the commercial feasibility of hydrogen cars
Submitted by Anonymous (not verified) on Thu, 02/21/2013 - 21:36
Andreas Moser looks at the future of the automotive industry and the latest composite materials technologies
Submitted by Anonymous (not verified) on Thu, 02/21/2013 - 21:36
For 100 years the four-stroke internal combustion engine has been the dominant automotive powerplant, but there is a pressing need to improve fuel efficiency, emissions and power density
Pages