subscribe
 

New rotary lump breaker

5th December 2018


A new model RDC-2424-MS De-Clumper rotary lump breaker from Munson Machinery breaks chunks of agglomerated abrasive or friable materials that have compacted during storage or shipment, conditioning them for downstream processing or conveying.

Material entering the 610mm square inlet is reduced in size by dual rotors with three point, single piece AR-235 abrasion-resistant steel breaking heads rotating with minimum clearance above a curved, perforated bedscreen. 

On-size material exits through 25mm diameter apertures in the bedscreen. Other bedscreens are available with apertures ranging from 25 to 64mm in diameter.

Powered by a 5.6 kW motor with gear reducer and a rugged chain and sprocket drive, the synchronised shafts rotate at approximately 120 RPM, offering high throughput rates with minimal heat generation. A side mounted bedscreen can be rapidly removed for cleaning, replacement or maintenance.

The compact, low-profile design allows inline placement in restricted spaces between upstream and downstream processing, packaging or bulk storage equipment. With an optional feed hopper and support structure, it can also operate as a stand-alone unit.

The unit is recommended for breaking lumps in product flows of bulk materials such as cement powders, sodium or calcium carbonates, fertilisers and bulk chemicals of all types.
According to the manufacturer, it is built to withstand heavy usage and is simple to maintain; bearings can be lubricated through external fittings and are isolated from the product processing area with air purged shaft seals.

Suitable for industrial and chemical applications, it is also offered in 304/316 stainless steel, finished to sanitary standards for food, dairy, pharmaceutical or industrial applications.

The company also manufacture higher capacity models with square or rectangular inlet openings up to 1220mm, and up to four rotors driven by motors up to 30kW.







Previous Issues

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Subscribe



Newsbrief

twitter facebook linkedin © Setform Limited