subscribe
 

Large scale EV trial

22nd December 2017


Volkswagen Commercial Vehicles has handed over the first e-Crafter vehicles to an international group of major customers at its headquarters in Hannover. The customers will be testing the new electric vans in everyday use until mid-2018. Dr Eckhard Scholz, Chairman of the Board of Management of Volkswagen Commercial Vehicles: "We have developed the new e-Crafter with our customers and for our customers. We are therefore now integrating selected fleet operators into an initial customer phase so that their findings in daily operations with the vehicles can flow into the final design of the zero-emission van."

Nothing beats practical experience: major customers from Germany, Great Britain, the Netherlands and Sweden are testing the new e-Crafter vans in practical use. They are package delivery services, energy suppliers, trade businesses and individual retailers whose vehicles cover between 70 and 100 kilometres per day. Sometimes with each day involving hundreds of starts and stops. These parameters apply to around 85% of the trips made in an urban setting according to analyses performed by Volkswagen Commercial Vehicles on more than 210,000 driving profiles with over 1,500 customers. The e-Crafter has been tailored precisely to these typical city operations and distances with its 100 kW power output, range of around 160 km and top speed limited to 90 kph.

The lithium-ion battery of the e-Crafter is, however, completely integrated into the underbody. This means that the entire cargo volume is fully usable; the same applies to key dimensions such as its loading width (1,380 mm) and loading height (1,861 mm). The transporter's maximum payload is between 1.0 and 1.75 tonnes depending on the version. At a CCS charging station supplying 40 kW (direct current), the battery (energy capacity 35.8 kWh) can be charged to 80% after just 45 minutes. If an AC wallbox supplying 7.2 kW (alternating current) of power is used, the battery can be charged to 100% within 5 hours 20 minutes. This is generally done overnight.

The e-Crafter will be available in September 2018. By then it will have the distinction of having already been extensively tested by customers in practice and made fully ready for the market.

 







Subscribe

Previous Issues

 

 

 

 

 

 

 

Subscribe



Newsbrief

twitter facebook linkedin © Setform Limited