subscribe
 

60W dual redundant hot swap power supplies

26th May 2015


60 watt AC input G1X2 and DG1X2 48V DC input models have been added to Stadium Power’s range of 1+1 redundant 1U industrial single output and ATX / EPS power supplies.

These are optimised for secure bulk power applications including digital imaging, communication systems, industrial PCs and telecom or broadcast systems.

The power supplies have a long term track record of product reliability, safety and performance, reducing the risk of equipment failure and are designed to operate at maximum advertised load rating constantly.

Each redundant power supply (RPS) contains two 60W power supply modules that normally share the system load. Even in the rare instance of a module failing; the other will keep the system running at full load. The non-functioning module can be removed and replaced (hot swap) without removing the input voltage, ensuring uninterrupted operation 24/7.

Like other dual redundant hot swappable power supplies in the range; the G1X2 and DG1X2 provide a simple path to upgrading OEM design from a single to dual redundant power conversion. Key Features include a power good signal, over power protection, over voltage protection, short circuit protection with led, buzzer and TTL signal of any fault condition.

The DC outputs of the range can be 12VDC or meet Industrial PC Intel requirements.

Standard features of the Stadium Power G1X2 /DG1X2 series include 90~264VAC universal input voltage or 48VDC (39-72VDC range). 

Models include the G1X2-1060V with Universal AC input and +12Vdc Output, the  G1X2-5060V with Universal AC Input and +3.3VDC, +12DC, -12DC, +5VDC standby (ATX) Output, the DG1X2-1060V with 48Vdc Input and +12Vdc Output, and the DG1X2-5060V with 48Vdc Input and +3.3VDC, +12DC, -12DC, +5VDC standby (ATX) Output.

UL, CUL and TUV safety agency approvals and dimensions are to 190x106x39.5mm.







Subscribe

Subscribe



Newsbrief

twitter facebook linkedin © Setform Limited