With its advanced differential pressure flow technology, the new V2 System Flow Meter from McCrometer features built-in flow conditioning for superior accuracy and requires minimum upstream/downstream straight-run piping when installed.
The V2 System Flow Meter is the ideal new or retrofit flow meter solution in a wide range of industrial process or plant water and wastewater applications.
The V2 System shines in line sizes from 4 to 18 inches, wherever irregular or crowded piping and equipment conditions make other flow technologies impractical or unworkable due to the complex, costly construction needed to meet their longer straight-run piping requirements. It is easy to install, requires virtually no maintenance and features a long-life for a low life-cycle cost.
The V2 System comes pre-packaged and ready to install with a new built-in 3-way valve that isolates the transmitter from the process fluid flow for easy maintenance without shutting down the pipeline. It arrives from the factory wet-flow calibrated, eliminating many of the common headaches that arise when adding a flow meter to any existing flow installation.
The V2 System Flow Meter accurately measures flow over a wide flow range from 40 to 7500 gallons per minute, depending on the line size.
The V2 System's cone actually conditions fluid flow to provide a stable flow profile that increases accuracy. The V2's design features a centrally-located cone inside a tube. The cone interacts with the fluid flow and reshapes the velocity profile to create a lower pressure region immediately downstream.
For more information, visit www.mccrometer.com"