The 1-035SL Captive-Joiner 9.5 SNAP-LINE offers all the benefits of traditional captive screws PLUS improved ease of use by the end-user, significant reduction in time of installation, and reduction in the risk of damage to sensitive electronic equipment housed inside enclosures.

The Captive-Joiner also functions as a slam to close latch, requiring just a simple push of the panel against the frame to ensure latching.

The Captive-Joiner is:

* Designed for ease of use by the end-user - disengaging the two panels is achieved by turning the knob 45° instead of the more time consuming traditional screwing/unscrewing required for a captive screw.
* Can be completely removed from both panels on-site and re-installed quickly with a simple push making it ideal for maintenance applications. A technician can gain access to the equipment with a simple 45° turn to open and a simple push of the panel back to the frame for latching.
* Where misalignment is a concern the Captive-Joiner compensates for tight tolerances that are difficult to achieve.
* Knob design offers a comfortable grip for actuation and opening and eliminates the need to install a separate handle.
* For applications which require restricted access the Captive-Joiner is available in a tool (NEBS) operated style.
* Traditional captive screws require an insert which can become dislodged if excessive force is applied from the captive screw. The fallen insert can severely damage the electronic equipment housed inside the enclosure. Since the Captive-Joiner does not require an insert, this problem is completely eliminated.
* Secure attachment to the panel eliminates the possibility of the Captive-Joiner falling out under extreme vibration conditions and damaging sensitive equipment housed inside the enclosure.
* Single component design which combines the function of the captive screw and the captive nut/cage nut. With only one component to inventory the number of SKU's is reduced and the installation process is significantly simplified.
* Fits the standard cut-out of 19” racks - 9.5 mm x 9.5 mm so there is no need to modify the panel cut-out.
*
Because the Captive-Joiner is easy to install and does not require additional processes for installation, the panel can be finished before the Captive-Joiner is installed. The risk of damage to the surface finish is virtually eliminated with the Captive-Joiner's simple, one-step installation process. Also, the Captive-Joiner can be easily installed by hand anywhere along the production line, which eliminates the need for a separate production area for installation.

Captive-Joiner