Self-Locking Cube Jack Adds High Capacity Lifting

Online Editor

The new Enerpac SCJ-100 model is the latest addition to the Self-Locking Cube Jack product series, offering a compact, 100-ton capacity portable hydraulic system for incremental lifting and lowering of heavy loads. The Self-Locking Cube Jack uses a base lifting frame and self-aligning, lightweight steel cribbing blocks to provide high-capacity and stable lifting.
 
Steel cribbing blocks have several benefits over wood cribbing, including lightweight steel design and, weighing less than 25kg, can be handled manually. Reduced manpower requirement: two people can do the same work as four people in a quarter of the time.
Also, significant time savings: 50% less cycles than climbing jacks and a safer and more controlled alternative to climbing jacks with wooden cribbing. In addition, the SCJ-100 offers improved side load.
 
“Our SCJ-Series Cube Jacks provide users with a safe and efficient method of incremental lifting,” said Pete Crisci, product line director – Heavy Lifting Technology at Enerpac, speaking about the series which also includes the 50-ton capacity SCJ-50 Cube Jack introduced last year. “The design results in cost savings in mobilisation and manpower as well as cutting the overall time to perform a lift. Cube Jacks are mechanically locked and stable up to their maximum heights, ensuring safety for operators at all times.”
 
Steel cribbing blocks are only inserted once the load is mechanically locked on the cube jack. They are easily aligned in a single movement, providing optimum safety, so the operator does not need to put hands beneath a load suspended by hydraulic pressure. The Cube Jack is derived from the proven Enerpac Jack-Up System, but in a vastly smaller footprint allowing it to be used in confined spaces and without the need for electrical controls. The compact size and portability of Self-Locking Cube Jacks offer a powerful solution for numerous applications, such as equipment maintenance, vehicle unloading or jacking a transformer, module, or bridge.
 
Enerpac 100-ton Cube Jack – Synchronised Lift
 
Up to eighteen 23 kg (50 lbs) steel cribbing blocks can be safely and easily stacked onto the SCJ-100 Cube Jack base frame yielding a maximum height of 3006 mm (118.3 inches). The base frame footprint measures just 655mm x 636mm (25.8 in x 25 in), making it ideal for restricted operating space. A low 558mm (22 in) minimum initial jacking height increases flexibility and reduces operational start-up time.
 
Cube Jacks operate with up to 700 bar (10,000 psi) hydraulic pressure and are compatible with standard pumps, such as the Enerpac Split-Flow Pump that offers the ability to evenly operate multiple Cube Jacks.
 
The SCJ-100 Cube Jack comes with a storage frame to make tool maintenance and inventory management easier.