Paul Boughton
A new series of conical antivibration base mounts from Advanced Antivibration Components (AAC) are designed to dampen shock and vibration for compression loads up to 1632kgf (3598lbf).
Identified as the V12Z06MA...Series, their metric housing is made of zinc plated steel and the isolator is made of a nitrile rubber compound which offers excellent pliability and elasticity. The maximum recommended load of the 6 isolators in the series ranges from 510 kgf to 1632 kgf (1124 lbf to 3598 lbf). They are featured at the AAC eStore where you can order online, request a quote, download CAD models, check stock plus view catalog and technical pages. Typical applications include their use under controllers, large pumps, fans, motors, compressors, and other medium load equipment. Their durometers are 45 and 60 ±5.
AAC stocks a wide range of antivibration and shock isolation products which include: stud nut type mounts, base plate fastened mounts, wheels, leveling foot mounts, suspension mounts, spring, steel mesh cable mounts, bumpers, shock absorbers channel mounts, bushings grommets, pads, tapes, and couplings.
These products are stocked in different materials including: rubber, neoprene, urethane, Sorbothane, stainless steel mesh and springs. Many are suitable for use in extreme environmental conditions. Of special interest is a complete selection of Silicone Gel floor mounts, pads, sheets, plus paste-type thermal gel.
For more information, visit www.vibrationmounts.com
Identified as the V12Z06MA...Series, their metric housing is made of zinc plated steel and the isolator is made of a nitrile rubber compound which offers excellent pliability and elasticity. The maximum recommended load of the 6 isolators in the series ranges from 510 kgf to 1632 kgf (1124 lbf to 3598 lbf). They are featured at the AAC eStore where you can order online, request a quote, download CAD models, check stock plus view catalog and technical pages. Typical applications include their use under controllers, large pumps, fans, motors, compressors, and other medium load equipment. Their durometers are 45 and 60 ±5.
AAC stocks a wide range of antivibration and shock isolation products which include: stud nut type mounts, base plate fastened mounts, wheels, leveling foot mounts, suspension mounts, spring, steel mesh cable mounts, bumpers, shock absorbers channel mounts, bushings grommets, pads, tapes, and couplings.
These products are stocked in different materials including: rubber, neoprene, urethane, Sorbothane, stainless steel mesh and springs. Many are suitable for use in extreme environmental conditions. Of special interest is a complete selection of Silicone Gel floor mounts, pads, sheets, plus paste-type thermal gel.
For more information, visit www.vibrationmounts.com
