subscribe
 

Clinch fasteners for thin-metal assemblies

21st February 2013


PEM self-clinching concealed-head studs and standoffs install permanently in steel or aluminum sheets as thin as .062-in/1.6mm to provide strong and reusable threads for mating hardware in a wide range of thin-metal assembly applications. 

Their concealed-head feature contributes particular design benefits by allowing the side of the sheet opposite installation to remain smooth and untouched. This feature additionally serves to satisfy applications where the sheet must remain completely sealed from air, liquid, dust, gases, or other potentially infiltrating elements.

The aluminum or stainless steel studs are available in thread sizes #4-40 through #10-32 and M3 through M5 and in lengths from .250-in through 1-in and 6mm through 25mm. Stainless steel standoffs are offered in thread sizes #4-40 through 1/4-20 and M3 through M6 and in lengths from .187” through 1” and 4mm through 25mm.

Sheet preparation for their installation requires only a blind milled hole to the recommended minimum depth.

For more information, visit www.pemnet.com








Your Career

Your Career

Newsbrief

twitter facebook linkedin © Setform Limited