Temperature sensors are easy to install
HBM is introducing the TT-3/100 temperature sensor that is made of a 5um-thin nickel measuring grid embedded between two polyamide foils. It is therefore very flexible and can be fitted to both flat and curved surfaces.Each sensor is glued onto the component – in the same way as strain gages – resulting in excellent thermal contact and a rapid response time. Integrated solder tabs are provided for making the electrical connections to the data acquisition system.
The TT-3/100 temperature sensor covers a range of -70 to +180 degrees C and has a nominal (rated) resistance at 0 degrees C of 100ohms. An appropriate amplifier for making resistance measurements is required for temperature measurement.
HBM has designed the TT-3/100 to complement its range of strain gages and the sensor is particularly suitable for applications where strain gages are used at the same time.
For more information, visit www.hbm.com/stressanalysis
