https://specials.auma.com/en/profox?utm_source=engineerlive&utm_medium=onlinebanner&utm_campaign=profox_2024

New technologies reduce environmental impacts of coal-fired plants

Paul Boughton
Robert S Giglio looks at the reality of clean coal in our energy future

Coal-fired power plants play an important role in providing energy at low prices. The reality is that coal is abundant, efficient, and less expensive than most other energy options and will remain an important part of our energy future.

Coal accounts for about 50 per cent of electricity production in the US, and, as shown in Fig. 1, it remains the lowest cost energy source for US residences.

However, coal-fired plants do emit carbon dioxide (CO2), a greenhouse gas (GHG) into the atmosphere, and efforts are underway to improve coal's environmental performance so we can take full advantage of this plentiful resource.

Current and developing clean coal technology

'Clean coal technology' describes a new generation of energy processes, some currently available and others being developed, which have the ability to sharply reduce air emissions and other pollutants. These new technological breakthroughs make it possible for new and older coal-burning power plants to produce power in an economical and environmentally responsible manner.

Among the key options under development for use alone or in combination are:

  • Optimising existing plants so they reduce emissions and increase the amount of electricity produced with the same amount of coal.
  • Continuing to develop and refine best-available combustion technology, including circulating fluidised-bed (CFB) technology, which includes supercritical and ultra supercritical combustion. This option may also include burning biomass as a fuel, thus reducing the level of CO2 emissions, and oxy-combustion for collecting CO2-rich flue gas.
  • Gasification - turning coal into a gas and removing impurities from the coal gas before it is combusted.
  • Carbon capture and storage (CCS) - capturing the carbon dioxide from the flue gas and storing it underground or reusing it.

Obama Clean Coal

The Obama-Biden administration has stated that coal must play a part in our nation's energy strategy. The White House Energy and the Environment Agenda includes an initiative to develop and deploy clean coal technology. At his Senate confirmation hearing, Dr. Steven Chu, the Obama administration's Secretary of Energy, stated: "Coal is an abundant resource in the world. It is imperative that we figure out a way to use coal as cleanly as possible."

To stimulate the kind of innovative thinking needed to find ways to use coal cleanly, the government funds numerous research projects through the US Department of Energy (DOE) and has pledged to work towards advancing clean coal technologies.

That pledge comes in the form of government co-financing for new coal technologies that help utilities cut pollutants from power plants, and demonstrate ways to reduce GHGs by boosting efficiency. Most recently, recognising that carbon sequestration and storage (CCS) technologies hold enormous potential to reduce GHG emissions from coal-fired power plants, DOE has begun funding projects that use CCS technologies and/or beneficial reuse of carbon dioxide.

DOE is funding an initiative to equip multiple new clean coal power plants with advanced CCS technology, stating: "As technological advancements have been realized in the last five years, the United States is eager to demonstrate carbon capture and storage technology on commercial plants that when operational, will be the cleanest coal-fired plants in the world."

In addition, the DOE is also participating in a number of international CCS efforts, including projects in Canada, Germany, Australia, Algeria, and China.

It is clear that government and its industry partners place high hopes that these public-private partnerships will lead to technology breakthroughs allowing coal-fired plants to continue to provide safe, affordable energy.

The Future of Clean Coal

Scientists and engineers in the US and abroad are conducting research and demonstration projects to prove that coal can be used to produce energy efficiently and responsibly and, in the process, provide clear evidence that clean coal can in fact play a significant role in our energy future for many years to come.

Optimising existing plants is the 'low-hanging fruit' of technologies, because it makes the best possible use of what we already have. In the United States, optimisation includes using sophisticated software to help plants reduce emissions, increase efficiency, lower costs, and improve reliability. One example is an integrated online optimisation system at a coal-fired plant located in Baldwin, Illinois, that led to a 12-14 per cent reduction in nitrogen oxide (NOx) emissions, reduction of ammonia consumption by 15-20 per cent, increase in fuel efficiency and available megawatt hours, and reduction in GHGs, mercury, and particulates.

In the developing world, where many coal-fired plants operate far below their design efficiencies because of poor quality coals, poor plant maintenance, and lack of diagnostic tools and instrumentation, optimisation programs could include implementation of low cost best practices that would save millions of tons of coal, avoid million tons of CO2 emissions, and improve the plants' financial performance. Refurbished power plants would be more efficient and emit less CO2. Plants could also be upgraded with new pollution control equipment to emit less sulphur dioxide, nitrogen oxide, particulates, and other emissions, including mercury. Although some demonstration projects have been implemented, much more work is needed in this area, because the economic and environmental payoff would be so significant.

Circulating fluidised-bed (CFB) technology is an existing available technology, already being used to burn coal and other fuels to produce energy in a clean, environmentally responsible way. CFB is a clean coal combustion platform with a unique low temperature combustion process that can burn both traditional fuels and carbon-neutral fuels, including biomass, waste coals, tires, and processed waste materials. The technology can be used to significantly reduce CO2 emissions to the atmosphere.

Unlike conventional steam generators that burn the fuel in a high-temperature flame, CFB technology does not have burners or a flame within its furnace. CFB uses fluidisation technology to mix and circulate fuel particles with limestone as they burn in a low temperature combustion process. The limestone captures the sulphur oxides as they are formed, while the low-burning temperature minimises the formation of nitrogen oxides.

The fuel and limestone particles are recycled over and over back to the process, which results in high efficiency for burning the fuel, capturing pollutants, and for transferring the fuel's heat energy into high-quality steam to produce power.

The CFB technology is now being integrated with vertical-tube, once-through unit (OTU) supercritical steam technology, which provides the best combination of features for efficient, cost effective, and environmentally responsible power production. The innovative boiler design uses BENSON vertical-tube supercritical once through steam technology for the evaporator steam circuit.

Foster Wheeler is the leader in the design and development of CFB technology and has begun to upscale its output by firing at an unmatched capacity. With more than 350 units already sold, research is now underway on an important enhancement to the basic CFB technology that will allow it to become part of a practical CCS solution. New or retrofitted coal-fired power plants could operate in oxy-combustion (carbon capture) mode, which would produce a CO2 rich flue gas that can be practically captured and stored. Costs to run in this carbon neutral oxy-combustion mode are substantially higher than normal mode, but the plants can be built in stages so power generators can defer the CCS portion of the capital investment until it is justified by market and policy conditions.

Gasification is a manufacturing process that converts any material containing carbon, including coal, into synthesis gas (also known as syngas). The syngas can be burned to produce electricity.

Research is being conducted on Integrated Gasification Combined-Cycle (IGCC) systems, in which the syngas is burned as fuel in a combustion turbine, which drives an electric generator. Exhaust heat from the combustion turbine is recovered and used to boil water, creating steam for a steam turbine-generator.

The use of these two types of turbines together (combined cycle) is one reason why gasification-based power systems can achieve high power generation efficiencies. Research suggests that future IGCC systems may achieve efficiencies approaching 45 per cent, and the goal is to achieve efficiencies as high as 60 per cent. By comparison, a conventional coal-based boiler plant that uses only a steam turbine-generator is typically limited to efficiencies of 33-40 per cent, although it may achieve 45 per cent or better under some conditions.

Higher efficiencies mean that less fuel is used to generate the rated power, resulting in lower costs and the formation of fewer greenhouse gases. For example, a 60 percent-efficient gasification power plant could cut the formation of carbon dioxide by 40 per cent, compared to a typical coal combustion plant.

Carbon capture and storage (CCS) means separation and capture of CO2 from fossil fuel-fired power plants and the recovery of a concentrated stream of that CO2 that can be transported by pipeline and stored, in either an underground formation, or the sea bed. Most research efforts are focused on systems for capturing CO2 from coal-fired power plants because they are the largest stationary sources of CO2.

CCS technologies include post-combustion (captures CO2 from power plant flue gases), pre-combustion (widely used in fertilizer manufacturing and in hydrogen production without any CCS) and oxy-fuel combustion (still in the demonstration phase, but showing great potential because recycling the flue gas through the boiler concentrates the CO2 level in the flue gas, making it easier to separate the CO2.)

According to the DOE's National Energy Technology Laboratory: "CCS technologies, if commercialized and widely deployed, would allow us to continue using fossil fuels in tandem with the existing energy infrastructure ... As we continue to use current fossil energy sources for years to come, we need ways to control CO2 emissions for the energy systems we're using ... By attacking the problem from several fronts - energy conservation, expanded use of renewables, as well as CO2 emission controls including CO2 capture and sequestration, on existing and new systems - we have the best chance at reducing GHGs while maintaining a strong economy, which requires energy at a reasonable cost."

Clean Coal Power

Despite the many commendable efforts taking place to develop sustainable forms of power generation, coal and other solid fuels are likely to remain an essential part of the nation's energy picture for many years to come. As one of the nation's lowest-cost electric power sources for the foreseeable future, coal will remain a necessary and important part of US energy production. The nation is turning to clean coal technologies as a way of making use of this abundant and available resource in the most environmentally responsible way possible. New coal technology promises to balance environmental and economical concerns, while continuing to satisfy our growing world with energy output.

Robert S Giglio is the Director of Global Marketing and Strategy for the Foster Wheeler Global Power Group.

 

Recent Issues